This email address is being protected from spambots. You need JavaScript enabled to view it.
+49 (0) 21 51 - 39 56 70

Software

BAPPU - time  Published #

BAPPU-time - Software for long-term records (Windows 7,8,10)
Version: 5.6.0.3
Date: 31.10.2018

BAPPU - Standard  Published #

BAPPU – Standard Software (Windows 7,8,10)

Version: 5.1.0.1
Date: 03.08.18

BAPPU-Firmware  Published #

Update for all BAPPU-evo

Version: 2.1.6
Date: 19.11.2018
Please note that you always have to carry out a PC update during the firmware update.

pdfInstructions

List of firmware versions regarding feature / sensor extensions


Minimum versions PC software for complete Operation of the added measuring ranges
Official customer versions Currently receiving update BAPPU standard software Bappu-Time
2.1.6 X 5.1.0.1 5.6.0.2
2.1.4 (from here VOCOOsx particulate matter) 2.1.6 5.1.0.1 5.6.0.2
2.0.3 X 5.0.0.1 5.5.0.0
2.0.2 2.0.3 5.0.0.1 5.5.0.0
2.0.0 (from here VOCOO VOC CO) 2.0.3 5.0.0.1 5.5.0.0
1.4.2 X 4.0.0.0 4.5.0.0
1.4.1 1.4.2 4.0.0.0 4.5.0.0
1.4.0 (from here VOCOO CO2) 1.4.2 4.0.0.0 4.5.0.0
1.3.7 1.4.2 4.0.0.0 4.5.0.0
1.3.6 1.4.2 4.0.0.0 4.5.0.0
1.3.5 1.4.2 4.0.0.0 4.5.0.0
1.3.4 1.4.2 4.0.0.0 4.5.0.0
1.3.2 1.4.2 4.0.0.0 4.5.0.0
1.3.0 1.4.2 4.0.0.0 4.5.0.0
1.2.0 (from here anemometer II) 1.4.2 4.0.0.0 4.5.0.0
1.1.0 1.4.2 4.0.0.0 4.5.0.0
1.0.6 1.4.2 4.0.0.0 4.5.0.0
1.0.2 1.4.2 4.0.0.0 4.5.0.0

BAPPU-Changelog

2.1.6
07.08.2018
Amendments 2.1.4 -> 2.1.6
New features:

  • Double page setup at the first start of a measurement after restarting the BAPPU fixed.
  • Info view is now rebuilt when VOCOO or CO2 sensors are plugged in.
BUG fixed:
  • Head and footline were incomplete in the areas of temperature and particulate matter on the alternative pages.
  • Measured VOC and CO values ??were not displayed in the single view without connected sensor.
  • When VOCOOsx (particulate matter only) and old CO2 are connected, the single view of CO2 changes to VOCOO.

=============================================================================

2.1.4
07.08.2018
Amendments 2.0.3 -> 2.1.4
! Display update necessary !
New features:

  • VOCOOsx now works with particulate matter.
  • Dew point is calculated and displayed.
Improvements:
  • Cargo optimized on power banks.
  • All areas can now be selected individually in the logger menu (previously restricted to VOC).
  • The overview at the end of a measurement series now contains all measuring ranges.
  • BAPPU now remembers the location of the last selected AP.

=============================================================================

2.0.3
26.06.2017
Amendments 2.0.2 -> 2.0.3
BUG fixed:

  • Selection of the measuring ranges in the logger configuration in the BAPPU (CO2, VOC)
  • Improvements in the LD measurement

=============================================================================

2.0.2
02.06.2017
Amendments 2.0.0 -> 2.0.2
BUG fixed:

  • CO2 / VOCOO serial number was displayed incorrectly
  • Improvements in the illumination measurement (no software-related outliers in the long-term recording)

=============================================================================

2.0.0
27.04.2017
Amendments 1.4.2 -> 2.0.0
New features:

  • Full VOCOO support including VOC and CO! Display update necessary!

=============================================================================

1.4.2
04.05.2016
Amendments 1.4.1 -> 1.4.2
BUG fixed:

  • Anemometer serial number was not displayed anymore.

=============================================================================

1.4.1
29.04.2016
Amendments 1.4.0 -> 1.4.1
Improvements:

  • Detection of the USB power supply improved

=============================================================================

1.4.0
07.04.2016
Amendments 1.3.7 -> 1.4.0
New features:

  • VOCOO support (first only replacement for CO2)

=============================================================================

1.3.7
24.11.2015
Amendments 1.3.6 -> 1.3.7
New features:

  • First preparations for operation with VOCOO (internal tests)

Improvements:
  • Improvements in noise measurement

=============================================================================

1.3.6
9.7.2015
Amendments 1.3.5 -> 1.3.6
Improvements:

  • Improvements in noise measurement

=============================================================================

1.3.5
9.6.2015
Amendments 1.3.4 -> 1.3.5
Improvements:

  • Improvements in the illumination measurement

=============================================================================

1.3.4
13.6.2014
Amendments 1.3.2 -> 1.3.4
Improvements:

  • Improvements in the illumination measurement

=============================================================================

1.3.2
13.6.2014
Amendments 1.3.0 -> 1.3.0
New features:

  • Additional functions for the lighting laboratory

=============================================================================

1.3.0
24.1.2014
SVN-Rev: 700
Amendments 1.2.0 -> 1.3.0
Improvements:

  • Improvements in the illumination measurement

BUG fixed:
  • The initialization of the illuminance sensor is checked and, if necessary, repeated

=============================================================================

1.2.0
11.12.2012
SVN-Rev: 677
Changelog 1.1.0 -> 1.2.0:
New features:

  • Support for Anemometer II
  • Turbulence level is calculated by the anemometer (only averaged anemometer ranges)
  • Turbulence levels for the averages are stored
  • Air pressure is displayed at airspeed averaging ranges

Improvements:
  • Improved query of external sensors
  • Change the text "Show CPeak" to "CPeak measure"


This email address is being protected from spambots. You need JavaScript enabled to view it.
+49 (0) 21 51 - 39 56 70
Top